Installed Sound on sale always!

It supports uncompressed two channel PCM as well as compressed multi channel bit stream audio (Dolby Digital AC-3 Dolby Pro Logic, DTS) and provides two channels of analog outputs both on RCA as well as 3.5mm headphone jack

VThe Pro48's innovative internal switching power supply significantly increases headroom producing less distortion while yielding a smooth, linear response that extends from 20Hz to well above 40kHz.

The Radial ProD2 is a compact stereo direct box developed specifically to address the needs and challenges of interfacing a stereo keyboard to a professional audio system.

The use of the Pro Co LOT-P transformer allows the LS82 to provide floating low-impedance outputs with wide flat frequency response ultra-low distortion and no ringing or overshoot to degrade transient response. 

The MS2’s ruggedly constructed “Uni-box” enclosure is formed of extruded aluminum side channels and16-gauge steel top bottom and end plates and is designed to protect switches and connectors from accidental damage.

The MS3's ruggedly constructed "Uni-Box" enclosure is formed of extruded aluminum side channels

The MS42A’s rugged 16–gauge steel and aluminum “Uni–box” enclosure is finished in a durable black texture powder coat finish with black anodized aluminum side channels. Easy– to–read control graphics are incorporated into the Lexan® front and back panel overlays.

The MS43A’s rugged 16–gauge steel and aluminum “Uni–box” enclosure is finished in a durable black texture powder coat finish with black anodized aluminum side channels.

The MS82 can be mounted in any standard 19” (482.6mm) rack. Top quality connectors and switches provide trouble-free service even in abusive situations such as remote broadcast and recording operations.

The MS82P can be mounted in any standard 19” (482.6mm) rack. Top quality connectors and switches provide trouble-free service even in abusive situations such as remote broadcast and recording operations.

The MS83’s rugged 16–gauge steel and aluminum “Uni–box” construction enclosure is finished in a durable black texture powder coat finish with black anodized aluminum side channels.

The MS83P can be mounted in any standard 19” (482.6mm) rack. Top quality connectors and switches provide trouble-free service even in abusive situations such as remote broadcast and recording operations.

Model # - DIR 
Impedance Ratio (input to output): 133:1 
Frequency Response: 20Hz-20kHz ±1dB 
Level Change (input to output): -20dB (pad out) -50dB (pad in)

The DIRECT2 combines features found on two of our DIRECTOR ^® Live Sound > Signal Processing > Install Sound > Installation Accessories > Direct Boxes in one unit.

This unit contains two separate DIs - input your signals with one 3.5mm (1/8") mini TRS stereo jack (tip=left + ring=right + sleeve=common negative) or two sets of color coded RCA phono type input and through jacks. Output is via corresponding color coded XLRs. 

Operating Level: -50dB to +4dB

Frequency Response: 20Hz-20kHz ±1dB

Max input level: -0.5 dBu