We (Kutthouze International) will use the data you provide here to contact you regarding your call request or order. That data will remain in our system, visible to our staff (or the relevant vendor), until you withdraw your consent. If you’d like to have your personal data removed, send an email to firstname.lastname@example.org.
If you believe that your personal data has been misused, you have the right to lodge a complaint with a supervisory authority. We’re obliged by EU General Data Protection Regulation to let you know about this right; we don’t actually intend to misuse your data.
The CSX IRR10 is a reference conferencing infrared receiver that supports up to ten language channels. A large OLED display clearly shows all required info!
The PS4000 W comes in a rugged half-rack metal housing and works with all active and passive AKG antennas, RA4000 B/W, RA4000 W, SRA2 B/W and SRA2 W.
The ESRSC is a control interface that enables a contractor to add external control, contact closure, programmable mute functions and status indication to any dynamic or condenser microphone.
This simple interface eliminates the programming requirements associated with third-party control systems, while providing a familiar and low-cost dialing interface to the end user.
It supports uncompressed two channel PCM as well as compressed multi channel bit stream audio (Dolby Digital AC-3 Dolby Pro Logic, DTS) and provides two channels of analog outputs both on RCA as well as 3.5mm headphone jack
The UHBX-3S is an HDMI splitter with one local HDMI output and 3 HDBaseT™ outputs for extension to compatible receivers up to 150 meters using a single UTP. The Splitter supports HDCP, 3D, Deep Color and CEC. EDID management is integrated into the unit with "Pass-thru", "Learn", and "Emulate" features.
Full-duplex RS232 Serial Port extension is provided that can operate at any baud rate to 115,200 (independent of video activity). The extender can also extend IR from one end to the other. IR Detector and IR Emitter cables are sold separately.
UHBX-P2 is an extender kit ( combination of UHBX-S-PD + UHBX-R-PSE ) from Hall Research that utilizes HDBaseT™ technology. It can send HDMI, IR, bi-directional RS-232, and PoH (Power-over-HDBaseT™) to 500 ft (150 m) on a single Cat6 cable.
UHBX-R-PD receiver module when paired with compatible sender ( Hall Research model UHBX-S-PSE ), can extend HDMI, bi-directional IR, full-duplex RS232, and PoH (power over HDBaseT™) over distances of up to 150 meters (500 feet) using a single Cat6 cable.
UHBX-R-PSE receiver module when paired with compatible sender ( Hall Research model UHBX-S-PD or UHBX-SC-WP ), can extend HDMI, bi-directional IR, full-duplex RS232, and PoH (power over HDBaseT™) over distances of up to 150 meters (500 feet) using a single Cat6 cable.
UHBX-S-PD sender module when paired with compatible receiver ( Hall Research model UHBX-R-PSE ), can extend HDMI, bi-directional IR, full-duplex RS232, and PoH (power over HDBaseT™) over distances of up to 150 meters (500 feet) using a single Cat6 cable.
User Interface keypad for VSA System. Includes separate mic and source volume controls with LED bar indicator along with 8 custom programmable buttons can be configured to perform any system action or a combination of actions.
• Versatile remote control for ASPEN and DM Series processors through the logic I/O ports
• Switch contacts can be used to recall presets, launch macros or control levels
• Upper six LEDs under control of logic out connections on DM processor
• Lower two LEDs light with button press
• Sturdy desktop pedestal included
• Optional CAT-5 to DB-25 adapter simplifies installation
VThe Pro48's innovative internal switching power supply significantly increases headroom producing less distortion while yielding a smooth, linear response that extends from 20Hz to well above 40kHz.
The Radial ProD2 is a compact stereo direct box developed specifically to address the needs and challenges of interfacing a stereo keyboard to a professional audio system.
The use of the Pro Co LOT-P transformer allows the LS82 to provide floating low-impedance outputs with wide flat frequency response ultra-low distortion and no ringing or overshoot to degrade transient response.
The MS2’s ruggedly constructed “Uni-box” enclosure is formed of extruded aluminum side channels and16-gauge steel top bottom and end plates and is designed to protect switches and connectors from accidental damage.
The MS3's ruggedly constructed "Uni-Box" enclosure is formed of extruded aluminum side channels
The MS42A’s rugged 16–gauge steel and aluminum “Uni–box” enclosure is finished in a durable black texture powder coat finish with black anodized aluminum side channels. Easy– to–read control graphics are incorporated into the Lexan® front and back panel overlays.
No data found
Your name will appear next to your review or comment, visible to everyone. We (Kutthouze International) also save your IP address as a security precaution, but in can only be viewed by our staff. It will remain in our system until you withdraw your consent. If you’d like to have your personal data removed, send an email to email@example.com.
No items found matching the search criteria